Powering Hummingbird Kia and Mitsubishi EV Drivers
  • Phone: +44 207 0550 956
  • Email: hello@jbselectrics.co.uk


JBS Electrics



Mounting Location Indoor or Outdoor (permanent mounting)
Charging Mode Mode 3 (IEC 61851-1 compliant communication protocol)
Display Graphical backlit LCD
Front LE DMulticolour, according to charge status and current
Charging Current 6A to 32A (variable)
Dynamic Load Balancing Optional setting to limit current drawn from the unit supply or the grid
Connector Type Type 2 tethered cable (6.5m) or Type 2 socket with locking system
Charging Profile 3 charging modes: ECO, ECO+ and FAST
Compliance LVD 2014/35/EU, EMC 2014/30/EU, EN 61851-1 :2017, EN 62196, EN 62955:2018CE Certified

Charging Modes

ECO Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home.Charging will continue until the vehicle is fully charged, even if power is drawn from the grid.
ECO+ Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will pause if there is too much imported power, continuing only when there is surplus free power available.
FAST In this mode, the vehicle will be charged at maximum power. This is just like an ordinary Mode 3 charging point.

Electrical Specifications

Rated Power 7kW (1-ph) or 22kW(3-ph)
Rated Supply Voltage 230V AC Single Phase or 400V AC 3-phase (+/-10%)
Supply Frequency 50Hz
Rated Current 32A max
Standby Power Consumption 3W
Earth Leakage Protection Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)
Economy Tariff Sense Input 230V AC sensing (4.0kV isolated)
Wireless Interface 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
Grid Current Sensor 100A max. primary current, 16mm max. cable diameter
Supply Cable Entry Rear, bottom or side

Mechanical Specifications

Enclosure Dimensions 439x 282x 122mm
Protection Degree IP65 (weatherproof)
Enclosure Material ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006
Operating Temperature -25°C to +40°C

Installation requirements

Circuit Breaker 40A curve B (2-pole 1-ph or 4-pole 3-ph)
Earthing Arrangement TN : can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)
TT : earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles

Model Variations

Model No. Rating Connector Colour
ZAPPI-207UW 7kW Untethered White
ZAPPI-207TW 7kW Tethered White
ZAPPI-207UB 7kW Untethered Black
ZAPPI-207TB 7kW Tethered Black
ZAPPI-222UW 22kW (3-phase) Untethered White
ZAPPI-222TW 22kW (3-phase) Tethered White
ZAPPI-222UB 22kW (3-phase) Untethered Black
ZAPPI-222TB 22kW (3-phase) Tethered Black
JBS Electrics